How to Clean and Polish Marble Floors

Demand for marble cleaning products has increased as the amount of people opting for marble floors has also increased. The truth is, marble cleaning and polishing kits are expensive and ultimately unnecessary. You can achieve the same look using a damp cloth or mop and some tin oxide. Marble will always add value to your home in both visual appeal and in financial worth.

If you do use marble polishing products be sure to read the label and follow the instructions exactly.

Never use acid products to clean marble tiles. The calcium carbonate, which marble is composed of, will be destroyed by the acid. The acid will find its way under the highly buffed polish or finish and will spoil the surface. Soaps, even mild detergents, are also not suggested. If you’re not using a proper marble cleaner, use warm water only.


To clean and polish marble floors:

1. Start by sweeping away the excess dirt using a soft bristle broom.
2. Wet the entire marble surface with clean water.
3. Sprinkle tin oxide over the whole wet area. Tin oxide is the home ingredient found in marble polishing kits. You can find tin oxide at any hardware store for a cheaper price.
4. Using a soft rag or cloth, rub the marble floor forcefully in a circular motion until you can see improvements.
5. Use a wet rag to wipe the surface down and then repeat using a dry, soft cloth.
6. Apply marble flooring sealer


Dave’s Tip:

For heavily damaged, soiled areas call a professional marble restoration service.


Residential Cleaning Melbourne